An EASY to use fastener that offers a PRACTICAL and RELIABLE way to fasten a cloth diaper, replacing the diaper pin. It comes in a variety of colors and is made from a stretchable non-toxic material, which is T-shaped with 'teeth' on each end. These 'teeth' hook into the diaper fabric to ensure a snug-fitting diaper with enough natural movement for the baby.

Snappi® s have become the cloth diapering necessity that "pulls it all together"

Snappi®s WORK BEST with Snappi® terry cloth diapers, cotton prefolds (Chinese or DSQ), and other cloth diapers with a loose enough weave for the Snappi to hook into. They DO NOT work well flannel or any other tightly woven diapers, even most hemp diapers.

The new shape Snappi® fastener now offers an additional SAFETY FEATURE! When the Snappi® fastener is not in use, fold the thin strip at the end of each leg to the back of the Snappi®, and slip over the teeth of the white grip. This acts as a barrier and prevents the sharp teeth from being exposed.

1. STRETCH the Snappi® fastener before its first use. The stretching triggers the 'memory' of the Snappi® to return to its original size, and in so doing, will pull the diaper together to the middle to allow for a snug fit. This is essential for the Snappi® to work properly. This can be done by holding the Snappi® in the center with one hand, and close to the end of the leg with the other hand. Then s-t-r-e-t-c-h a few times (10 or so). As you do this you should feel how the material 'softens' or gets more elastic. Follow this stretching procedure with each leg. The Snappi® is now ready to go!

2. Make sure that the Snappi® is ATTACHED SECURELY. It is important that the Snappi® 'leg' being attached be stretched across the diaper before hooking it into the diaper. When attaching the Snappi®, hold onto the solid part of the tab. DO NOT pull on the loops. So,

Hook Left,
Stretch ACROSS and Hook Right,
Stretch DOWN and Hook Center

In other words, the Snappi® fastener should go from a ‘T’ shape to a ‘Y’ shape.

By following these instructions, the Snappi® should be secure and the diaper will fit snugly. ALWAYS place a cover over the diaper and Snappi® fastener.

The Snappi® fastener is manufactured from FDA approved raw materials, a polyester based polyurethane which is degradable on aging through hydrolysis and/or microbiological attack. It contains NO latex or any other adulterant, dilutent or modifying polymers. The composition is 100% polyurethane. It is made in South Africa.

Snappi® is an inventive solution to the simple problems of diapering. This unique product was invented by a father who experienced frustration changing his own child's diapers. The first Snappi® was introduced to the South African market in 1987 at a trade fair where 4000 units were sold within days.

Mothers were delighted! Their response to Snappi® exceeded all expectations.

This product is suitable for new-borns as well as busy toddlers. Snappi® is trusted by moms and dads all over the globe. A snap solution to easier parenting.